The long-awaited return of HKS' CAMP system is now a reality with the release of CAMP2.  CAMP2 is an all-in-one engine multi-meter system that is incorporated with a vehicle's on-board factory or aftermarket monitor.

       The launch of the CAMP2 comes just as HKS celebrates its 35th Anniversary. The first generation CAMP was released by HKS in 1996.  At that time, it was the first monitoring system of its kind allowing users to view vehicle engine information.  During the time of CAMP's initial release, on-board factory monitors were still rarities in cars available in North America and aftermarket units were not as commonly seen as they are today.  CAMP2 is now available for purchase through your authorized HKS dealer.

TECHNICAL INFORMATION:

    •  Users can view up to 6 simultaneous readings while monitoring up to 24 data signals
    from the vehicles OBD2 port and optional HKS Sensors.

    •  Installation is simple and connects to the vehicle's self-diagnostic OBD2 port enabling the
    CAMP2 to function on a variety of vehicles and applications.

    •  CAMP2’s menu features are user switchable to Metric or SAE readings according to user
    region.

    •  ECO Drive – Programmable calculations for fuel costs, average fuel consumption, and
    fuel efficiency lets the user monitor real time data readings.
    (Vehicle applications vary, ECO option is only available to vehicles with the
    abillity to read Injector and Speed data)

    •  An included remote control allows the user to switch between functions and modes.
    The remote control receiver is separate from the base unit allowing convenient,
    user friendly placement.

    •  CAMP2 allows map editing for the F-CON S/SZ/iS.
    Map editing can be done only for unlocked maps; please consult with your Certified HKS
    Pro Dealer.

   Some Nissan vehicles may require the optional CONSULT harness.
    Vehicles equipped with an HKS F-Con S/SZ/iS and V-Pro can purchase an optional HKS F-CON
    connection harness* for additional monitoring features.
  (*For vehicles equipped with the HKS F-Con S/SZ/iS and V-Pro Engine Management system)

    •  Real time fuel efficiency can be monitored relative to time, distance and speed.

    • Up to 6 readings can be displayed on the screen at one time: TIME (Elapsed Time),
    DISTANCE (Driving distance), SPEED (Average speed), FUEL (Consumed fuel volume),
    ECO (Average fuel efficiency), COST (Fuel cost).

    • Real-time fuel efficiency is shown as a bar graph on the bottom right of the screen.

    •  Up to 6 simultaneous readings can be viewed on a time based axis by graph and digital
    meter.

    •  VIEW function: data changes at 0.2 second intervals can be monitored.

    •  Logging can be conducted for up to 600 seconds (10 minutes).

    •  Selected item(s) can be shown in the analog meter.

    •  Select from two modes: either 3 analog meter displays, or 1 analog meter with 6 digital     indicators below it.

    •  Analog meters accurately show continuously changing data.

    •  Selected item(s) can be shown in the digital meter.

    •  Select from 6 digital meters or 3 digital bar graphs to appear on the screen.

    •  Digital meter shows accurate data for each item.

* For vehicles equipped with HKS F Con S/SZ/iS/V-Pro Engine Management Systems

    •  The input value and/or the output value of each F-CON sensor can be monitored.

    •  F-CON S/SZ/iS data can be monitored and edited when connected to the CAMP2
    (depending on the F-CON model and/or installed sensors).
     Map editing can be done only for unlocked maps; please consult with your Certified HKS Pro      Dealer. (Data for F-CON V-Pro cannot be edited.)

    •  Settings can be adjusted based on engine specification, such as exhaust type or intake     type.