HIPERMAX IVGT BNR32 FULL KIT

Code
Name
MSRP
80230-AN008
HIPERMAX IVGT BNR32 FULL KIT
1980
Weight
Number of BOX
Length
Width
Height
20.9
1
685
290
410
Make
Model
Year
Engine
NISSAN
SKYLINE GT-R
1989 - 1994
RB26DETT
Remarks
N/A
Name
HIPERMAX IVGT BNR32 FULL KIT
Code
MSRP
80230-AN008
1980
Weight
Number of BOX
20.9
1
Length
Width
Height
685
290
410
Make
Model
NISSAN
SKYLINE GT-R
Year
Engine
1989 - 1994
RB26DETT
Remarks
N/A
HKS
  MAX IV GT SKYLINE GT-R
Explanation of the product Application chart

SKYLINE GT-R BNR32
MAX IV GT Code No. 80230-AN008
 
 


▲The above photo is an item for ZN6.

Awesome control and comfort ride on the street for a sporty drive. The new Max IV sporty suspension.



Application   Specification
Engine RB26DETT
Model Year 89/08 - 94/12
Remarks V-Spec II
 
  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Rubber Rubber
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory Possible Possible
Damping force adjustment with wire -
Helper spring
(Spring rate N/mm)
- ○ ( 19.8 )


Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 657 695 ~ 631 695 ~ 638
Against stock -38 0 ~ -64 0 ~ -57
REAR Ride height *1 651 671 ~ 582 671 ~ 604
Against stock -20 0 ~ -89 0 ~ -67
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information
Spring of Full Kit
  F R
Spring rate N/mm(kgf/mm) 69 ( 7 ) 69 ( 7 )
Free height (mm) 250 200
Spring type Straight Straight
Recommended range to change spring rate N/mm(kgf/mm) ±20 ( 2 ) ±20 ( 2 )
Specification of damper
  F R
Damping force (Rebound/Damping)N* 863 / 186 588 / 216
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 37 / 63 53 / 82
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
272 309 270 395 413 377
Spring
Set length(mm)
234 234 250 250 250 274
Length to ride hight
adjuster (mm)
25 62 7 62 80 20
Lever ratio 1.03 1.12
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.


Test vehicle information
  F R
Vehicle weight kg - -
Tire size (Air pressure) kPa 245 / 40 - 18 ( 230 ) 245 / 40 - 18 ( 230 )
Wheel size 9 JJ × 18 inset 22 9 JJ × 18 inset 22
Alignment
(Toe/Camber)
Test data out 1 mm / -2°00' in 5 mm / -2°33'
Standard value 0 ~ in 2 mm / -0°55' ± 45' in 2 ± 2 mm / -1°05' ± 30'
* Test data at HKS.


Parts List * It may be changed without prior notice.


Point
・We have set lower rate for comfort in everyday drive.
・Recommended dial in town ride is the factory spring rate of 24 stage front and 25 stage for rear.
・The vehicle height data from other than the test is computational data.(The numbers does not guaranteeing the height)
 
● Process for installation
Required to make an hole for rear damping adjustment cable(rear interior)
 
 
 
 
 


[ CLOSE ]

 

 

HKS